Need rid of my doner car.

[TiddlesRX7]

Well the time has come when I can no longer keep my doner car at my Nans house. The house is to be sold so I am gonna have to think about getting rid of the car. So if anyone is after some parts then let me know.
Its a 1991 UK TII in red SQ.

[grinder]

whats left on it mate ??

[TiddlesRX7]

Nearly everything except front wings and bumper.
Seats are no good though ( well they've been recovered in a crappy cream leather).

[peterwolds]

Adrian have you got a polished uim or alternator in your doner kebab ?

[L18M]

how much things going for..?

-instrament cluster (the outer back bit which u hit when the lights turn off when they ment to be on)
- elec window switch, drivers side (if they work well and not sticky when pressed)
- passenger seatbelt, mine is dirty due to broken window ages ago
-centre console lid / arm rest
-centre console, where the air vent is and covers the fan switches etc..

think thats it...

[TiddlesRX7]

Adrian have you got a polished uim or alternator in your doner kebab ?
Afraid not mate (otherwise they would have gone on mine). The alternator is a bit scabby actually.

how much things going for..?

-instrament cluster (the outer back bit which u hit when the lights turn off when they ment to be on)
- elec window switch, drivers side (if they work well and not sticky when pressed)
- passenger seatbelt, mine is dirty due to broken window ages ago
-centre console lid / arm rest
-centre console, where the air vent is and covers the fan switches etc..

think thats it...
Err not sure mate. The bit behind the gauges? Thats the dash isn't it? or do you mean the gauge surround bit? Oh and not so much mate.

[grinder]

Ade ,

are you selling bits at "grinder" friendly prices ??? :D

Stu

[Prof]

Ade,

Did you manage to get the exhaust hangers off this - I only need the easily removable parts that mount the rear cans and Y pipe - they look like a figure 8 :)

If you can get them off ready for RS6 :cheers

Cheers,

Dave.

BTW - what are the front hubs like ? Bearings good ?

[NeilSR]

what condition are the headlights in?

[TiddlesRX7]

Err no I completely forgot Dave. I'll have a look later if possible and if I can get them off I'll bring them to RS6 with me. As for the Hubs, As far as I know they are fine. I can push the car around so they bearings arn't siezed or anything. I would however like to leave it as long a possible before removing bits like that as I need to be able to move the car about the driveway for now.


And most thing will be a at a Grinder friendly price Stu yes.

[TiddlesRX7]

Headlights have gone im afraid Neil.

[grinder]

i have no idea what i need to be honest - but if its cheap then i dont mind storing stuff in the garage

will you just get to a point where you scrap what you have left ?

[Prof]

Err no I completely forgot Dave. I'll have a look later if possible and if I can get them off I'll bring them to RS6 with me. As for the Hubs, As far as I know they are fine. I can push the car around so they bearings arn't siezed or anything. I would however like to leave it as long a possible before removing bits like that as I need to be able to move the car about the driveway for now.


And most thing will be a at a Grinder friendly price Stu yes.

Happy to wait for the hubs - so no worries there. But if can get the hanger rubbers off for RS6 that would be champion and worthy of a beer :cheers

[L18M]

i guess its the dash then.. the black plastic surround where the indicator hangs off and light switches etc..

prof: i think i had a spare rubber on my fc. hangs the exhaust on passenger side. i dont need as the RE-a exhaust i got has the brackets and rubbers so once i get my fc back then u can have that if its the right bit.

[N22CK_C]

I would love rear caliper if there still available?

[TiddlesRX7]

Yeah I have both rear callipers. I rebuilt them last month too. only trouble is I must have trapped a seal or got some muck in at least one of them as I put the driver side one on and it leaked at the piston. Didn't bother trying the passenger side. Hows £50 delivered sound?

[TiddlesRX7]

Oh that bit Liam. Right I'll have a look next time Im at the car and make sure non of its damaged and I'll get back to you. If I can get it off before RS6 i'll bring it with me.

[papercutout]

Windscreen pretty please :D

(assuming it aint broke)

[TiddlesRX7]

Think the window screen is ok. Can't remember seeing any chips or cracks. Although arn't they really hard to take out without breaking them as they are bonded in?

[papercutout]

I don't know, but the one in the car I've got is cracked already (unroadworthy). I'd majorly appreciate you trying though, not managed to find one anywhere, for love nor money! Assuming it isn't cracked or chipped...

[TiddlesRX7]

Ok I'll have a go at taking it out for you. It won't be for a while though as I need to keep the car water tight as long as possible. How desperate are you for it?

[James H]

window washer motor (little motor on the bottom of the washer fluid bottle, maybe easier to just send the whole unit) please

[papercutout]

Its the only thing really holding me back from moving the car to my driveway to start work on it - I have a 2 week deadline to get the welding etc done once it hits the driveway, and on the road! So, I can kinda wait, as the car can just stay where it is atm, but the sooner I can get it, the sooner I can get the car in my hands :D But I also can't move the car minus a screen!


Going by what you said; anyone know where's best to get a new windscreen seal for one?

[L18M]

cheers man.. i'll take the screen washer bottle also pls.
the one i ahve atm is a smaller one so the fmic can fit.

hmm.. u sure ur fc is gonna be big enough to bring everything to R6..? hehe

[Prof]

What condition are the pedal rubbers ?

[TiddlesRX7]

James and Liam. I had to rob the washer bottle as mine broke when I had my bump. And I chucked the broken one and pump in the bin sorry.

Prof, Im not sure I'll check they've got 77K on them!

Papercutout, Have you thought about using your insurance to get the window replaced. Normally you just pay the excess (£50 or so for glass) and they come and fix or replace it for you. Plus it doesn't normaly effect your NCB.

[James H]

[QUOTE]cheers man.. i'll take the screen washer bottle also pls./QUOTE] oi you, sorry but i already have dibs on the washer bottle ;)

[grinder]

Papercutout, Have you thought about using your insurance to get the window replaced. Normally you just pay the excess (£50 or so for glass) and they come and fix or replace it for you. Plus it doesn't normaly effect your NCB.

to be honest i was thinking exactly the same :Hammer

[TiddlesRX7]

James, I had to use it to fix my car mate. Sorry.

[Prof]

James, I had to use it to fix my car mate. Sorry.

Sorry for the thread jack - but I think I have a spare water bottle from the drivers side with motor and switch - needs some silicon grease on the rubbers as it lets water out if overfilled. ;) I will bring it to RS6

Prof, Im not sure I'll check they've got 77K on them!

I only need the clutch one - mine is a tad lose :rollin, but I think the rubber bit is the same for brake / clutch, so it's likely one of yours is in better condition than mine.

[James H]

Thanks Prof but sadly not coming up to Rotorstock but still happy to have it off you, if you know of anyone going to Rotorstock who is from Hampshire could maybe pass it on to them & I could collect from them once they return, thanks James?

[NeilSR]

clutch slave cylinder?

[L18M]

[QUOTE]cheers man.. i'll take the screen washer bottle also pls./QUOTE] oi you, sorry but i already have dibs on the washer bottle ;)

sorry.. thought u jus having the pump. my mistake :)

[N22CK_C]

Yeah I have both rear callipers. I rebuilt them last month too. only trouble is I must have trapped a seal or got some muck in at least one of them as I put the driver side one on and it leaked at the piston. Didn't bother trying the passenger side. Hows £50 delivered sound?

mm they will be no good if there leaking like... i need (i think) passenger side one as i bust bolt off in the calliper so I've had to drill it out...

if the passenger side isn't leaking i would give you £25 posted for it :Thumbs-up

[TiddlesRX7]

I dunno if its ok or not TBH as I never tried it on the car. I was in a rush to get it ready for a track day I was doing later in the week.

Sorry Neil slave sylinder has gone mate. Although I have just bought a new master and slave cylinder for my road worthy FC. When I swap them over you have dibs on the slave cylinder if your interested.

[papercutout]

Papercutout, Have you thought about using your insurance to get the window replaced. Normally you just pay the excess (£50 or so for glass) and they come and fix or replace it for you. Plus it doesn't normaly effect your NCB.

TPFT, no windscreen cover, and without changing across to another company 6 months into my policy (not going to happen), I'll not get fully comp.

[Shiuko]

Prices for just the rear shock absorbers and for the set of four please.

[N22CK_C]

I dunno if its ok or not TBH as I never tried it on the car. I was in a rush to get it ready for a track day I was doing later in the week.


I defoneed a rear caliper so i will take it... send us an email..

nick@nickcurwen.com
:cool

[N22CK_C]

I defoneed a rear caliper so i will take it... send us an email..

nick@nickcurwen.com
:cool

REEEAAALLLY.... need a rear caliper so can get my car back together :rolleyes:

[TiddlesRX7]

Wow sorry Nick. Must have missed your last post somehow. Email heading your way in a mo.

[the hat]

i really need a wiper switch have you got one

[TiddlesRX7]

Yeah I've got one. You got an Email address?

[Shiuko]

I think that you've must overlooked my question, so I hope that you don't mind me asking it again.
Could you give me prices for the set of four shock absorbers delivered to Brighton?
Thanks

[TiddlesRX7]

Sorry Shiuko, I did indeed completely miss it. At this stage I need the shocks to move the car around. Athough the time when the car need to be gone is getting closer. Can I get back to you nearer the time? I do have however a set of Bilstien shocks for the rear if they are any good to you. These are ready to go.

[Shiuko]

Any rough idea of when would they be available and price?
I'll have to pass on the Bilsteins as I'd prefer a matching set of four.
cheers

[TiddlesRX7]

Well the car is at my Nan's house, and the house is to be sold. It is going on the market in the next week or two. So basically it could be anytime after then really, but I would say it would be a month or so at the earliest. How's £100 sound depending on postage cost.

[Shiuko]

Price is fine, but I don't know if I can wait that long.
If I can't find another set by the time you've taken yours out, I'll have them.
Cheers

[TiddlesRX7]

No probs. There was a cheap set of coilovers for sale in the for sale section.

[dthebuk]

providing i can get the car to my house. How much for the entire car as it is? I need some rear hubs as one of mine is in pieces.

[L18M]

providing i can get the car to my house. How much for the entire car as it is? I need some rear hubs as one of mine is in pieces.

buy my fc!!! pretty much drift spec :p
only catch.. no idea when it will be avaliable to be picked up lol

[dthebuk]

will you take my tramp FC as payment?
and is it STILL not ready? Spose thats the problems with these cars, there's always something that goes rong!!

[L18M]

its eternally 'almost there'
wont take ur tramp off u but will take the red one off ur hands :p
i'll even chuck in the roof spoiler, BGW, and u can keep the rota's on ur red one... plus any other fc parts i have.. re-a exhaust, 1/2 cage thats all i can think of for now ;)

[dthebuk]

ah you dont want the rota's!! damm. Ive decided to keep the ones on the back and get the same on the front. And if that fails its getting dish :D

half cage eh? how much do you want for that? I hear you dont drive your car at any speed what so ever so i doubt you'll need it :P

[L18M]

cage is free if u buy the fc hehe

sorry tiddles for messing up ur thread.. but free bumps for u :)

[MaLicE]

u still got the rad filler neck from the engine?? i need the whole bit and the cap...???

[TiddlesRX7]

Isn't it all part of the radiator? as in moulded

[MaLicE]

no it bolts on to the front of the engine... 2 10mm bolts i think with the rad cap on top of it...

[TiddlesRX7]

You mean the oil filler neck?

[grinder]

isnt that the rad cap - the S5 one bolts onto the rad ( i think )

[TiddlesRX7]

I'll have a look.

[MaLicE]

noooo not the oil filler neck, on the front of the engine.... drivers side (well is on the fd) should be the filler neck where you pour coolant in? the neck should have a nipple coming off of it... i want this for my fd so i can get rid of the ast...

[TiddlesRX7]

Ah right. You just confused me when you said engine earlier. Im off up to the car in a bit so I will have a look for you.

[TiddlesRX7]

Malice I got the rad filler neck off for you. Do you need the rad cap? (if not i'd like to hang onto it as a spare) How's £10 + P+P sound?

[MaLicE]

fantastic, yeh would need the cap too i think, what pressure is it? if its the same as my fd u can keep the cap :)

[beezy]

Dude you still have a Break master cylinder?
Sell? :)

[TiddlesRX7]

Err dunno its stock what ever that is! I'll look in the morning.

Beezy, Yeah still got the break master cylinder. Whats it worth to you? Those wheels on your new FC or a ride in your drift one some time?

[beezy]

Err dunno its stock what ever that is! I'll look in the morning.

Beezy, Yeah still got the break master cylinder. Whats it worth to you? Those wheels on your new FC or a ride in your drift one some time?

haha the breaks will work on her but wont drive without the wheels :Giggle

Yea man be happy to take you out for a skid anytime :)

Where you at dude? :)

[TiddlesRX7]

In the lake district. So I think i'll have to post it.

[beezy]

Dam, thats cool if you happy to.

you wanna Email me about shipping payment n bits JSB at Live.co.uk:Thumbs-up

[MaLicE]

cheers tiddles will check back here in the morning :)

[beezy]

any joy dude?

[TiddlesRX7]

Its on the car at the moment Beezy. I'll get it off for you as soon as I get the chance. Probably be the end of the week though dude unless your in a major rush for it.

[MaLicE]

u find out what the pressure is mate??

[TiddlesRX7]

Yeah sorry Malice its a 0.9 bar by the looks of things.

[MaLicE]

ok dont need the cap then :) you take paypal?? how much and when can you get it to me buddy :)

[beezy]

Aw, whats the chances of getting it to me by the end of week dude of am i realy pushing it?

Ta Jon

[TiddlesRX7]

Paypal is
Adrianreed27 at yahoo dot co dot uk
£13 delivered do ya? I'll post it tomorrow.

[TiddlesRX7]

I'll see if I can get to it tomorrow for an hour Jon (the cars not at my house). Shouldn't take long to get off I don't think. As soon as its off I'll let you know.

[beezy]

Oh cool man, just so ya know 4bolts by pedles, 2breaklines and the vac pipe wella ;)

Your a lifesaving legand dude

[MaLicE]

money sent mate, address is in the extra comments bit but will pm you also!

[Mobilemick]

Do you have
1.nearside indicator lens,( the one on the wing)
2.speakers for the rears
3. may need a drivers headlight motor

Ordered some plugs for wednesday, so if that doesnt cure it, ill look at the coil u got :)

Mick

[Mobilemick]

Passenger front wing, are they easy enough to change ?

[TiddlesRX7]

Yeah Mick I should have an indicator lens knocking about somewhere. Speakers im not sure about. Are they the ones in the shock turrets you need? And headlight motor as discussed on MSN.
I'll have a look and get back to you.

[grinder]

mick - is the motor defo shot at ??

and let me know if you get it running when you get some new plugs !

[TiddlesRX7]

Yeah Mick they arn't too bad TBH. The first time is always the worst! the hardest bit is getting the 3 nuts off the inside of the wing that hold the wing to the bumper. Yoyu've got to go in through the wheel arch. A long extention does the trick though.

[TiddlesRX7]

Oh I've got a red egi one you can put on tempory if you need to.

[beezy]

Any joy on that M/C dude?

[beezy]

.........:)........

[TiddlesRX7]

Did you get my email Beezy?
Been waiting for a responce all day.

[beezy]

Aw man sorry, im a :censored::censored::censored:!!

You have mail. :)

[beezy]

More mail :)

[TiddlesRX7]

Engine including UIM LIM Injectors etc as per thread in for sale section now £275 ono.
Any other engine bits intercooler, gear box (needs rebuild really), Front callipers, hoses etc are available too. Just ask.

Grinder if you want the pedals come get em!

[papercutout]

Getting to the stage you've got an empty shell and want to flog the screen yet? ;) lol

[pdtaylor18]

I hope someone lets you have a screen soon papercut as you have been banging on for ages for one. With all the cars being broken then surprised one has not found its way to your car yet.

Adrian your matrix gets picked up today so should be with you tomorrow. Also pickup off suspensions should happen tomorrow as well.

[dthebuk]

2.speakers for the rears





Ive got some knocking about, not sure on their condition as i never used them. You can have them for the price of postage if you wish?

sorry for the thread hijack

[TiddlesRX7]

Papercutout if you want the screen and can get up in the next week or so you can gladly have a go at getting it out.

[j3d1]

Dont suppose you could send me some of the rubber seals / trim as mines a bit rubbish? No worries if its too much hassle, I'm looking for rear windscreen / hatch surround and all the trims and rubbers from both doors.

Thanks,

[TiddlesRX7]

If I get chance to take them off I will for you. Think they just pull off so should be ok.


Grinder.............your loosing your touch I offering you some free stuff.

[papercutout]

Its like, 5 hours each way for me to go there - which isn't feasible (should have checked before suggesting!).
If anyone knows of a courier they'd trust to ship a screen (I don't) I'd suggest sending you my removal tool to have a go with :(

[j3d1]

If I get chance to take them off I will for you. Think they just pull off so should be ok.

Thats great, thank you. They should all just pull away although the rear hatch (glass surround) may need a little gentle pursuation (sp!).
Let me know when you need my postal address and how much ££ you want.

Thanks

[grinder]

Grinder.............your loosing your touch I offering you some free stuff.

i know ... i would have been up like a shot ( your text was just a few days too late ) - i would have filled the car with stuff to be honest - it would have been fine just sat in my garage :( :( :(

[m1tch]

What is actually left?

[pdtaylor18]

still need any of the internal trim whats left of it. Pretty much anything in black then its needed apart from dash etc as i have those,

[grinder]

nothing chaps - it gone :(

i dont want to put the reason why - as Ade might not want people to know

but its now in the big garage in the sky

[TiddlesRX7]

Grrr parents. Who'd have them. Not a happy bunny. You would think at 29 (and a dad myself) they'd have stopped interfearing by now! No such luck.#
Basically I had 10 mins yesterday morning to get to the car and get anything out of or off the car. When I got to it it was half loaded onto a truck. I managed to get the side skirts and everythig I had stored in the boot but thats it. Sorry guys.