Lindop Motorsport

[Silverstone Autosport]

LINDOP MOTORSPORT
Hi,Colin & Dwayne would like to introduce ourselves as the rotary team members at lindops.Between us both we have ten years of rotary experiance & development from servicing,engine rebuilds & single turbo conversions and a whole lot more.We also have between us 19 years in the motor trade covering all makes and models.Our rotary experiance was gained at WGT AUTO DEVELOPMENTS covering all aspects of the rotary engine including dyno work to get the most out of your RX7,We would like to invite you all by cliking our link on the home page or feel free to call us on 07970776634 for any information reguarding your RX7

THE WEB SITE IS CURRENTLY BEING UP DATED AS WE SPEAK SORRY FOR THE LACK OF INFORMATION !!!

[Jit]

Hey Dwayne! Good to see you on board at last! :)
Looks like people oop narf finally have an alternative to WGT now too! Having met Dwayne, I can safely say hes a very reasonable bloke and with plenty of rotary experience from NZ and from here plus with a "no-bodge-up" mentality, i can see Lindop building up a good name for themselves! Good Luck dude!

[interloper393]

hi there r u closer o a scottish peeps than pips then?

[davehg]

think they are on the border of north wales possibly near broughton??? may be totally wrong mind :Nono!

[Warthog]

Hello and Welcome and good luck......:cheers

[kev-yorks]

Do you guys have dyno facilities there and what ECU's have you mapping experience on?
Kevin

[Silverstone Autosport]

Thanks for the response so far, yes we are in north wales near chester the post code is CH52TE if you would like directions. worst case we offer a collection service at top rates,Yes we are a little closer to scotland.We do have dyno facilities and we use apexi & microtech engine managements.but are happy to look at any systems you have fitted,

Thanks for the warm welcome warthog

[John_Hudson]

welcome :D

[Silverstone Autosport]

Thanks for your welcome John (nice pussy).

[andysmee]

Thanks for your welcome John (nice pussy).

I can see you'll fit in just fine!

Welcome!

[Silverstone Autosport]

Tanks for the welcome.Are u up our neck of the woods

[FLAT4MATT]

Thanks for your welcome John (nice pussy).

:rollin :Giggle

[FLAT4MATT]

So do you guys do everything then? Engine, chassis, body, race prep?

[Silverstone Autosport]

yes we do engine builds,servicing and all types of dyno work.All our body work is done through our body shop in wrexham.

[John_Hudson]

my cat is wicked lol

[Silverstone Autosport]

Ha ha im sure it is John!!! what do you drive mate?

[John_Hudson]

me? I drive 93 FD ;)

http://www.mazdarotaryclub.com/forums/showthread.php?t=34291

had a fair bit done since those pics were taken but well you get the jist

[Silverstone Autosport]

nice example are you still running standard ports?

[John_Hudson]

sure am, making 436 FWHP off em so im happy enough for now :D

will be rebuilding and porting a block next year as a project so well fingers crossed ;)

[Silverstone Autosport]

sure it will be a killer just take your time on those ports if you get stuck just give us a call, are you going the full hog exhaust port mods as well?

[John_Hudson]

sure why not, no point doing things by halfs ;)

and thanks for your support also :Thumbsup!

[interloper393]

What do u charge for a remap bud? im needing mine done as iv done a few mods plus non-seq conversion, needs maped to uk fuel :P.. also if i got a fpr, injectors and a uprated fuel pump, what safe boost could i run on standard non-seq turbos is 1bar safe? have a front mount, vented bonnet, greddy rad, almost everything not needed pulled out the engine lol.. standard ports..

fankoo :D

[Silverstone Autosport]

Morning all,sorry we have not replied to any of your questions as we have been mad busy getting things ready for the chatsworth show(pop an see us if u get chance over this weekend).We can take a look at your car no problem.Your looking around £175 for your mapping and we will check over the rest of your engine for you.I would run 0.9bar of boost tops.Giv us a call with anyother enquiries on

[interloper393]

can u do compression test and printouts ? once mines up n running im going to bring it down to you, whats the charge for collecting from KA6 6LH.

cheers

[COUNTZERO1978]

Think my rex may need some work too :-(.Its failed its emission test badly & looking into having it looked at & as im from scotland its a long trip :-(.Will give u call n try & arrange something!.

[Silverstone Autosport]

No problem matey, give us a ring any time during the week or most Saturday mornings.

Cheers,
Steve

[FLAT4MATT]

Just thought I'd officially give the guys at Lindop my seal of approval... I left the car with them while on holiday to carry out some work, fitting polished UIM, LIM, and throttle body, removing rats nest, general tidy up of the engine bay, sort out the knocking at the rear and the lumpy Idle. They did all of that and sorted out some vaccum/boost leaks and re-welded my exhaust bracket to clear the solid diff mount.

Excellent standard of work (and I'm picky) very professional and friendly fellas who are willing to spend the time to talk things through with you. And I didn't get the usual sting in the tail when it came to paying for the work, very reasonable! Thumbs up from me big time! Since the boost and vacuum leaks have been sorted the car feels so much better and the engine bay looks GREAT!

Thanks again lads, I'll be back...

[Silverstone Autosport]

Many thanks for the kind words Matt, glad to hear you're pleased with our work. Look forward to seeing you again (for the right reasons obviously).

Cheers,
Steve

[interloper393]

hi bud did u ever receive the solonoid pack i posted to you?

[Silverstone Autosport]

No, it never came. Did you send it recorded delivery? What was the exact address you sent it to?

[marcusd666]

Just want to say that these guys are great big thumbs up I drop my car in for so work suspension work and other little bits great service the car feels like a new car. The lads are really helpful and spent a lot of time talking to me about the work they did and other stuff about my car. Can't wait to go back when they have got the rolling road at the new workshop later this year. So a big thanks to Colin and Dwayne for looking after my car.

[Silverstone Autosport]

Just want to say that these guys are great big thumbs up I drop my car in for so work suspension work and other little bits great service the car feels like a new car. The lads are really helpful and spent a lot of time talking to me about the work they did and other stuff about my car. Can't wait to go back when they have got the rolling road at the new workshop later this year. So a big thanks to Colin and Dwayne for looking after my car.

Glad you're happy Marcus, look forward to seeing you again.

Cheers,
Steve

[ENVYD]

i must also say a BIG thanks as well!
for doing a very good job of my rebuild and fitting all sorts of parts i wanted done and also getting it through a M.O.T and making it kick ass fast with stock twins lol

very friendly and so helpful i could not of asked for more
will defo be dealing with them in the near future to get new twins and clutch fitted

thanks again
steven

:Party:cheers

[paul3944]

A Big thumbs up from me :Thumbsup!

Bought my FD with a knackered engine which they duly collected and took to the workshop.

A complete engine rebuild with street porting and lots of MOT work was handled with ease.

Big thanks to Dwanne for giving me a lift to the Post Office in his Evo to sort out some road tax :Thumbs-up

Even let me had the pick of the best bits of interior off the FD's there breaking.

After going to another tuner in the NW for years I think I will stick with Lindops in the future.

All the best,
And thanks to Steve,Dwanne,Colin and the young lad who cleaned up my car.

Paul