clive
9th October 2002, 09:23 PM
Hi All
This may help,you can compression test a Rotary with a normal compression tester if you take the non return valve out then watch the 3 readings you get from each Rotor write them down then add 20% to your readings and you will get a close figure to work with,you need to do all this on a warm engine with the correct oil level.
All the best
Clive
This may help,you can compression test a Rotary with a normal compression tester if you take the non return valve out then watch the 3 readings you get from each Rotor write them down then add 20% to your readings and you will get a close figure to work with,you need to do all this on a warm engine with the correct oil level.
All the best
Clive